How to Root Samsung Galaxy S9 and Install TWRP Recovery

How to Root Samsung Galaxy S9 and Install TWRP Recovery

How to Root Samsung Galaxy S9 and Install TWRP Recovery

The Korean Samsung Electronics recently released Samsung Galaxy S9 and S9+. We have now the superb news for the TWRP recovery for both the flagships. Obviously this is a tutorial “How to root Samsung Galaxy S9 and Install TWRP Recovery”. It means that you can root your Galaxy S9.

First of all to root Samsung Galaxy S9/S9+, you need require to install the TWRP recovery first. Once TWRP recovery is installed in your smartphone with the help of ODIN flash tool, you have to flash the zip file. We do so to access Samsung Galaxy S9/S9+. This rooting tutorial would be applied on the Exynos variants completely empowered by Samsung Galaxy’s process itself.

We are here with this tutorial to guide you all the way. In this tutorial you will learn how to root Samsung Galaxy S9 and Install TWRP Recovery.

How to Root Samsung Galaxy S9 and Install TWRP Recovery

A-Tips to Root Samsung Galaxy S9/S9+

Go through all the steps ahead very carefully. You must be carefull that doing all this may void the warranty of your Samsung Galaxy S9/S9+. Therefore you must understand the risk obviously. AndroidJunctions can not be held responsible for anything wrong goes in the process.

Pre-requisites to Root Galaxy S9/S9+

  1. You should Check the model of your phone. The above method will work only on Samsung Galaxy S9/s9+.
    2. You must take the full backup of your flagship.
    3. Keep the battery charging above 50%.
    4.Connect A USB cablefrom your flagship to the PC.

Download Files to Root Samsung Galaxy S9/ S9+ and Install TWRP

How to Root Samsung Galaxy S9 and Install TWRP Recovery

B-How to Install TWRP Recovery on Galaxy S9, S9+

Step 1. Enable your OEM Unlock option in settings.

             Go to settings>about phone,

               Either you” Build number” 7 times you wait for the “ you are now a developer”                                       

              Message. Now select toggle button.

Step 2.  Unzip the Odin folder on the desktop. You will see the ODIN file in the existing         desktop. Now you may use the following step to install the TWRP recovery on the smartphone Samsung Galaxy S9/S9+.

Step 3.   Therefore you have reached to boot your smartphone. Keep your phone into     download mode. In this process your flagship will go off for 10 seconds.

            Press the three buttons Power+Bixby+Lower volume button.

           Do this step unless you see the warning screen. Now start volume increase button to continue the download.

Step 4. Once your phone again comes into download mode connect your phone to pc through data cable.

Step 5.   You may run ODIN application on the connected PC . you will see the ODIN message on the screen.

Step 6. Load the TWRP file into ODIN. Therefore click the application button on Odin and select TWRP file in TAR format.

Step 7. Be sure that re-partition and auto Reboot checkbox are not selected under the Odin option tab.

Step 8. Everything is all set now. Now click the start button on the ODIN to flash the TWRP recovery on the flagship.

Step 9. Once the files have been flashed, PASS message will be seen on the ODIN screen.

 How to Root Root Samsung Galaxy S9/ S9+

Step 1. Even after following the above 9 steps , your phone is still in downloading mode.

 Step 2. Now you may boot you flagship in TWRP recovery mode.

            Press Volume+ Bixby+Power down  button together.  Lat the phone be turn off.

           Once the phone has gone off do it quickly. While holding the two Power + bibxy   

           And power volume up instead. It’s done to reboot into recovery mode.

Step 3. Therefore you phone will go into TWRP Recovery mode.

Step 4. Now you will have to follow all the system modification. Now tap on Wipe                 

            Option.  Select the data format option.

Step 5. Now connect the PC to your flagship and transfer SuperSU or Magisk files to your Samsung Galaxy S9/S9+.

Step 6. Once TWRP mode is activated select SuperSU/Magisk zip file.

Step 7. Tap the swipe action button to install the root tool.

Step 8. Now once you tapped on the reboot option, your smartphone will restart.

   Now your Samsung Galaxy S9/S9+ has been rooted and installed the TWRP recovery.

Though we have tried the best way to guide you, we wait for your honorable and respectful comments.




Leave a Reply